LithoPore® - LPAC Cast at Site Wall using form work can be applied to cast monolithic walls at site. First the form work has to be installed, than the LPAC will be manufactured and pumped into the form work. Depending on the applied density the form work can be removed after 24-48 hours already. The use of LPAC technology in opposite to other competitor products is leading to an excellent stability and therefore a completely consistent result. There is no variation in density if different parts of the wall are controlled by density. With LithoPore® - LPAC Cast at Site Wall using form work walls up to 3 meters in height can be poured.
The density can be varying between 200 kg/m² for non-load bearing walls up to 1400 kg/m³ for load bearing walls. So the applicator can decide whether to have a heavier product with high compressive strength and lower insulation effect or the reverse, an insulating product with sufficient compressive strength.